(see Drawing #1), Connect adaptor B (8) to the connector hose (7). Directions and Use 1. (ELECTROCATALYTIC OXIDATION) 1. This Limited Warranty applies only to the Krystal Clear Saltwater System and accessories listed below. Go directly to step 2 if your pool is empty. Chlorine loss due to intense sunlight exposure. Use a pool cover when the pool is not in use and/or when the unit is operating. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 OWNERS MANUAL English 260 PO IMPORTANT SAFETY RULES Read, understand, and follow all instructions carefully before installing and using this product. (Electrocatalytic Oxidation)Intex 26667EG, INTEX TEST STRIPS (PACKED WITH THE PRODUCT). Do not use a metal brush. Intex 26667EG | Pages: 27 | Created on: 2020-09-30 | File type: PDF | Filename: Intex 68309EP Excursion Pro Kayak, Professional Series Inflatable Fish Intex 28635EG Krystal Clear Cartridge Filter Pump for Above Ground Poo Intex 26339EH - 24 Foot Ultra XTR Frame Pool Set, Pool Maintenance and Chemical Definitions. See "Setup Instruction". PARTS FOR CONNECTION TO FILTER PUMPS WITH 1-1/4 (32MM) HOSE SIZE DESCRIPTION QTY. Adjust as needed. Cover the pool with a pool cover for 2 days with the device running and then test the water using the test strips. 2. Inspect the electrolytic cell for scale buildup. 8 1 12 6 7 11 5 2 10 14 3 13 4 15 16 9 NOTE: Drawings for illustration purpose only. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English TABLE OF CONTENTS Warnings. 3 Parts References. 4-5 Product Information & Specifications.. 6 Setup Instructions. 7-11 Salt & Pool Water Volumes (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English IMPORTANT SAFETY RULES Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014, Dont forget to try these other fine Intex products: Pools, Pool, Due to a policy of continuous product improvement, Intex. Not to scale. After the flow sensor has been inspected and cleaned, align the locator notch on the flow sensor to the connection ridge in the conduit. This might be a good time to visually inspect and clean the electrolytic cell. Do not shake excess water from the strip. Actual product may vary. Flashing code 00 appears on the electronic control stations LED, indicating that the unit is ready to be programmed. Disconnect the 2 hoses from the Saltwater System, and attach the cell covers (9) to the inlet and outlet of the electrolytic cell (3). oats available at fine retailers or visit our website listed below. It is also acceptable to use water conditioning salt pellets (the compressed forms of evaporated salt). Intex 26667EG Krystal Clear Saltwater System - Use Manual - Use Guide PDF. Dip the entire strip into the water and remove immediately. Go directly to step 2 if your pool is empty. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English 260 PO TROUBLESHOOTING GUIDE PROBLEM CAUSE SOLUTION INSUFFICIENT CHLORINE Insufficient operating hours of the Saltwater System. (electrocatalytic oxidation) (86 pages), Saltwater system with e.c.o. (Electrocatalytic Oxidation) Model ECO 7110 & 8110 For illustrative purposes only. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English 260 PO MAINTENANCE (continued) 3. Unscrew the collar of the flow sensor (6) and pull out the flow sensor from the electrolytic cell (3) housing. You can press and hold the BOOST button for another 5 seconds until the indicator is off, which will cancel the Boost cycle. (Electrocatalytic Oxidation) for up to 7000-Gallon Above Ground Pools, 110-120V with GFCI. 2. 4. We recommend that the cyanuric acid level be maintained at approximately 1% of the salt, i.e. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English SETUP INSTRUCTIONS (continued) 1. 3 1 3. Assembly and disassembly by adults only. Pour kitchen grade vinegar into the electrolytic cell (3) to immerse the titanium and ECO electrodes. Now turn the collar in a clockwise motion, tightening the sensor back into its position. If necessary, adjust the chemical level in the pool water. and more chlorine sanitizer production. See Salt & Pool Water Volumes. Children must stay away from this product and all electrical cords. Boost cycle First time installation, press and hold BOOST button for 5 seconds until the indicator lights up and the LED display 80. SPARE PART NO. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English PARTS REFERENCE Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English OPERATION INSTRUCTIONS 1. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English 260 PO SALT CALCULATION FORMULA FOR ALL POOLS Salt Needed for Startup (Lbs) Salt Needed for Startup (Kgs) Water Capacity (Gals) x 0.025 Water Capacity (Liters) x 0.003 Salt Needed when Salt Needed when Low Salt Detected (Lbs) Low Salt Detected (Kgs) Water Capacity (Gals) x 0.0067 Water Capacity (Liters) x 0. Dip the entire strip into the water and remove immediately. The temperature should be controlled, between 32 degrees Fahrenheit (0 degrees Celsius) and 97 degrees Fahrenheit (36 degrees Celsius). (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English 260 PO GENERAL AQUATIC SAFETY Water recreation is both fun and therapeutic. Filter pump not attached to system and/or switch on. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English 260 PO SETUP INSTRUCTIONS (continued) Connecting the system to other types of pool After you have connected the Saltwater System to the pump, connect it to the pool. Flush the electrolytic cell housing with the pool water. Reverse steps 3, 4, 5 and 6 to reconnect the electrolytic cell. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English SETUP INSTRUCTIONS (continued) Connecting the system to other types of pump (with different type of thread or no thread): The Saltwater System can also be adapted to other filter pumps with different thread or those without a thread on the connection. If your above-ground-pool is filled with water, unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs into the connectors, before installing the saltwater pool system. We recommend that you test the water chemistry weekly, and maintain the chlorine concentration at 0.5-3.0 ppm. High UV level exposure. Install as follows: Drawing #2 PLUNGER VALVE SWIMMING POOL WATER FROM POOL WATER TO POOL FILTER PUMP ID 1-1/2 (38mm) HOSE 7 ID 1-1/2 (38mm) HOSE SALTWATER SYSTEM WITH E.C.O. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English TROUBLESHOOTING GUIDE (continued) LED PANEL CODE SOLUTION PROBLEM LED Panel Code Flash & Alarm On (NOTE: Always turn off the power before cleaning and servicing). Ensure filter pump is attached and operating. Turn on the filter pump. Krystal clear saltwater system & filter pump, (133) MODEL CS8111 SALTWATER SYSTEM & FILTER PUMP ENGLISH 7.5" X 10.3" PANTONE 295U 11/17/2011. Increase the daily Saltwater System operating time. The original package can be used for storage. Read and follow the written strip instructions carefully. Check the salt level with the Test Kit. Unscrew the collar of the flow sensor (6) and pull out the flow sensor from the electrolytic cell (3) housing. Do not overtighten. NO. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 260 PO English INTEX POOLS SALT TABLE This table shows the amount of salt needed to achieve and maintain the optimal 3000 ppm salt level. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English SETUP INSTRUCTIONS (continued) Connecting the system to pump and pool with 1-1/2 (38mm) connections/hoses: Pump and pool with 1-1/2 (38mm) connections do not require the adaptors A (1) or B (8). 100 Lbs (45 Kgs) salt x1% = 1 Lbs (0.45 Kgs) cyanuric acid. Connect the adaptor A (1) to the electrolytic cell (3) outlet as shown in Drawing #1. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English MAINTENANCE IMPORTANT Unplug the power cord before cleaning your system. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English LIMITED WARRANTY Your Krystal Clear Saltwater System has been manufactured using the highest quality m aterials and workmanship. Tighten securely. 1. (ELECTROCATALYTIC OXIDATION) 1. (see Drawing #1). Disconnect the 2 hoses from the Saltwater System, and attach the cell covers (9) to the inlet and outlet of the electrolytic cell (3). 2. This indicates that the saltwater system has started E.C.O. Clean the electrolytic cell if necessary. Pool Size Water Capacity (Calculated at Salt Needed for 90% for Frame Pool and 80% Startup for Easy Set & Oval Pool) 3. This is insufficient. Connect the hose which goes from the pool to the cell. Now, return the strainer grids to the strainer connectors. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English SETUP INSTRUCTIONS Please visit www.intexcorp.com for the latest instructional video on the installation and operation of this product. Remove the black hat-like plugs that prevent water from flowing out of the pool. For filter pumps with 1-1/4 (32mm) hose size - To prevent water from flowing out of the pool, unscrew the strainer grids from the strainer connectors and insert the hat-like plugs into the strainer connectors. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English 260 PO POOL MAINTENANCE & CHEMICAL DEFINITIONS Preferred Water Chemistry Reading Minimum Ideal Free Chlorine 0 0.5 - 3.0 ppm Combined Chlorine 0 0 ppm pH 7.2 7.4 - 7.6 Total Alkalinity 40 ppm 80 ppm Calcium Hardness 50 ppm 100 - 250 ppm Stabilizer (Cyanuric Acid) 10 ppm 20 - 40 ppm Maximum 5.0 ppm 0.2 ppm 7.8 120 ppm 350 ppm 50 ppm Free Chlorine - Is the chlorine residual present in pool water. Soak for 1 hour. Clogged or dirty electrolytic cell. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10. Start up the unit: Plug the power cord into the electrical outlet and test the GFCI/RCD (circuit breaker). However, it will take a longer time for them to dissolve. Common salt (sodium chloride) is made up of two elements, sodium and chloride. To purchase parts and accessories or to obtain non-technical assistance. If the pool is clean and clear, add stabilizer to the water and then test the water with the device running. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English INTEX POOLS CYANURIC ACID TABLE Cyanuric acid is a chemical that reduces the loss of chlorine in water due to ultraviolet rays. Intex Krystal Clear Saltwater System with E.C.O. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English PARTS REFERENCE (continued) Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts. Hold the strip level for 15 seconds. If your unit has plunger valves, ensure that they are open. See Operating Instructions. To reduce your risk of injury, read and follow all product, package and package insert warnings and instructions. Now compare the strip pad to the color chart on the packaging label. reserves the right to change specifications and appearance, which may result in updates to the instruction manual without, To purchase parts and accessories or to obtain non-technical assistance, Visit. (electrocatalytic oxidation) (27 pages), Manual will be automatically added to "My Manuals", Pool Maintenance and Chemical Definitions, Water System Intex ECO 7220 Owner's Manual, Water System Intex ECO5110 Owner's Manual, Page 10: Product Information & Specifications, Page 17: Intex Pools Operating Time Table, Page 28: Pool Maintenance And Chemical Definitions. Saltwater System with E.C.O. 2. Open one side of the cell cover (9), drain and properly dispose of the vinegar. 5. Connect the adaptor A (1) to the electrolytic cell (3) outlet as shown in Drawing #1. Following are the common connection types: Connection to 1-1/4 (32mm) connectors: HOSE CLAMP ID 1-1/4 (32mm) HOSE 1 SALTWATER SYSTEM WITH E.C.O. This is depicted in Drawings #1 and #2. If your above-ground-pool is filled with water, unscrew the strainer grids from the strainer connectors and insert the black hat-like plugs into the connectors, before installing the saltwater pool system. Remember, however, that product warnings, instructions and safety guidelines cover some common risks of water recreation, but do not cover all risks and dangers. Switch on the unit. See Part Reference. Drain about 20 to 25% of the pool water and add fresh water to decrease the calcium hardness. Connect adaptor B (8) to filter pump outlet (lower connection). In a counter clockwise motion unscrew the collar of the flow sensor (6) and remove it from the electrolytic cell conduit. Tighten securely. READ AND FOLLOW ALL INSTRUCTIONS WARNING To reduce the risk of injury, do not permit children to use this product. Connection to 1-1/4 (32mm) hose: 8 7 FILTER PUMP ID 1-1/4 (32mm) CONNECTION SALTWATER SYSTEM WITH E.C.O. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English HOW THE CHLORINE IS GENERATED This product is specially designed for above ground pools. It is very important, to use the proper technique when testing the water's chemical level. All Intex products have been inspected and found free of defects prior to leaving the factory. Tighten securely. It will destroy the bacteria, oxidize bather organics and control algae, which provide a safe, clean and comfortable swimming pool. REF. All rights reserved. Also close the plunger valves on your pool or insert the black hat-like plugs in the strainer opening to prevent water spillage. IMPORTANT The Saltwater System requires a separate filter pump [700~3000 gph (2650~ 11355 lph)] to drive the water and function properly. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English SALT & POOL WATER VOLUMES Which kind of salt to use: Use only Sodium Chloride Salts Use only sodium chloride (NaCl) salt that is at least 99.8% pure. Tighten securely. OWNERS MANUALSaltwater System with E.C.O. (ELECTROCATALYTIC OXIDATION) 1. Switch off the unit, unplug the power cord from the electrical socket. Circulation line is blocked. Disconnect the water return hose from the filter pump connection and connect it to the adaptor A (1) on the Saltwater System with a hose clamp. 3. 6. Always supervise children and those with disabilities. The salt level in the pool water is less than 2000ppm. Disconnect the power cord from the electrical outlet. For filter pumps with 1-1/2 (38mm) hose size - Turn both plunger valve handles fully clockwise until they stop. Flow Sensor Cleaning 1. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English OPERATION INSTRUCTIONS (continued) 6. However, it involves inherent risks of injury and death. Pour kitchen grade vinegar into the electrolytic cell (3) to immerse the titanium and ECO electrodes. After the pool is completely empty, disconnect the Saltwater System from the hoses by reversing the installation instructions. See Maintenance. Remove the cell for inspection, clean it if necessary. (260PO) MODEL ECO7110&8110 SALTWATER SYSTEM ENGLISH 7.5 X 10.3 PANTONE 295U 07/07/2014 English 260 PO MAINTENANCE (continued) INTEX TEST STRIPS (PACKED WITH THE PRODUCT) The Test Strips can test the Free Chlorine, pH, Calcium Hardness and Total Alkalinity levels at the same time. After completing all maintenance tasks, you must plug the power cord back in and open the plunger valves or remove the plugs. Copyright 2022 ManualsFile.com. If deposits and debris are seen on the surface of the flow sensor, then use a garden hose to wash it off. This closes the valve, prevents the water from flowing out of the pool. Don't forget to try these other fine Intex products: pools, pool accessories, inflatable pools and in-home toys, airbeds and boats available at fine.